SA212 infusion pump,battery syringe pump with CE and FSC

Technical Specifications for SA2 SeriesInfusion Pump

Model No.

SA212

Flow rate range

1.0~1000ml/h (0.1ml/h step)

Bolus rate

800~1000ml/h

Volume limit

1-9999ml

Applicable IV sets

Comply with all brands after calibration

Accuracy

±5%

Bubble sensitivity

Detestability of air bubble ≥40uL

Occlusion alarm pressure

100KPa±20KPa

Alarming

Air Bubble, Occlusion, Door Open, Completeinfusion, Low power, Motor failure,Drop abnormal, Lowtemperature,Pause overtime ,Electrical circuit jam,Error set ofaccuracy,Air detect circuit error,Motor control error,Batteryexhausted

Drop sensor

Selectable

KVO rate

1ml/h with flow rate no higher than 10ml/h; 3 ml/h with flow rate higher than10ml/h

Internal battery

      Internal DC12VNi-MH battery can continuously run over 4 hours at averagerate.

Power

100-240VAC 50/60Hz

Power consumption

18VA

working environment

Temperature: 5-- 40°C ;Atmospheric pressure:20%--90%; Relative Humidity:   700hPa--1060hPa

Classification

Type BF, Class I continuous volumetric infusionpump with internal battery; IPXI

Size & Weight

165mm(length)×120mm(width)×210mm(height) ;3.5Kg

Standards

CE Certificate from TUV

Accessories

1pc User’s Manual, 1pc power cable

Warranty

18 months

Standards

CE0123